Notifications
Clear all
Topic starter
01/01/2025 7:45 pm
I'm just slaying...
03/01/2025 2:19 pm
Hello,
I just wanted to ask, when you are realeasing the canted Snowboard risers you where taking about.
Topic starter
03/01/2025 3:46 pm
when you are realeasing the canted Snowboard risers you where taking about.
Soon I hope! The manufacturer is back to work next week, I might be first.
I'm just slaying...
04/01/2025 3:41 am
And I have Seen your Video about the exigi Double wide. I have an EU 44(US 12) and I am about 60kg(~130pounds) and wanted ton ask of it would bei a good Idea to buy one of those.
Topic starter
04/01/2025 7:48 am
And I have Seen your Video about the exigi Double wide. I have an EU 44(US 12) and I am about 60kg(~130pounds) and wanted ton ask of it would bei a good Idea to buy one of those.
Definitely! You might be perfect for it with those flipper feet. How tall are you? What's your carving level?
I'm just slaying...
04/01/2025 12:55 pm
So I am about 180cm(5,9feet),15 Years old and a intermediat to advanced carver.
When are you are you going to be publishing the canted risers.
This post was modified 3 months ago 2 times by Daniel Seppele
Topic starter
04/01/2025 2:02 pm
When are you are you going to be publishing the canted risers.
Very soon I hope!
I'm gonna send you a private message about the boards right now.
I'm just slaying...
29/01/2025 2:29 am
Will this work on a 250cm wide board or is it too narrow?
29/01/2025 3:08 am
Millimeter lol
Topic starter
29/01/2025 1:19 pm
Will this work on a 250cm wide board or is it too narrow?
Probably. It's 260mm minimum width underfoot, you will have to measure the board width under your back foot inserts. It's also possible to shave 2-3mm from each side but I can't recommend shaving any more than that. And of course, any alterations to the product are at your own risk.
I'm just slaying...
29/01/2025 4:21 pm
-
I have these on my neversummer cougar 2024 161 wide. They really bring the board to life. Its a day and night difference. I use the center holes on both toe and heel side risers. I tried messing around with the other holes and It seems like I get more drive out of my heelside edge with them both centered. Note, I am riding 15 -9 on my stance angles. I find that they greatly improve control, especially on steeper terrain. Since on steeper terrain, you have to worry about boot out even more. Changing an edge on a 40%+ grade feels so much better without bootout. Once you try these, you wont want to ride without them. 10/10, would recommend.
Wild Cherry reacted
03/02/2025 10:36 pm
First batch of canted risers are released on the store page!
Topic starter
05/02/2025 5:35 am
First batch of canted risers are released on the store page!
Sold out in 30 hours!
I'll have a few more later this month
I'm just slaying...
06/02/2025 5:04 am
@wild-cherry Did you think about having these risers 3D printed ?
Delivery time would be much shorter and modifications much easier.
At the low volume you are making, I think it would also be cheaper.
11/02/2025 5:49 am
Is there a delay in shipping? I purchased a set 2 wks ago
Page 1 / 3
Next
