I should note that I tried the Cleavers (with Infinity straps) on the C4 and prefered it to the CV-LTD. Those Cleavers have seen A LOT of use, so I a...

Yeah, the Insano's are really too tight on my high instep. There's also the Trident with the 3 boa's that's not listed as being quite as stiff, but s...

@ronaldb yeah, those Burton heelcups are CHUNKY. Great measurements, what's the heel like without the cup? Right now your total overhang is 51mm. ...

I think James said it was first come, first served... when you're order comes up he'll see what's left in stock, and if it's not suitable you'll be in...

@ronaldb What's the width of your current board under the rear foot? The C4 is 296mm, so that'll give you idea of how much overhang you'll have on th...

@carvehard You're boots are 30mm longer than mine, so that should give you around 10-11mm of rear overhang on the C4 (less up front).

@carvehard If you order a "Wide" ProCarver it's 8mm wider. On ice I'm generally avoiding steep slopes and higher edge angles. With underhang I (sub...

Actually I made a mistake on the 6000 WW. It's only 263 on the 154... so actually went up 29mm in WW, but only 18mm underfoot.

Donek has a video here, along with a template that you can print, to do some measurements with your current setup: The template has different boa...

If anyone's talking to the Kindred guy, I would be interested in what the rear underfoot width is on the ProCarve.

@carvehard It depends how much overhang/underhang you want. Boots are often 35mm larger than the insole and you don't really trim that much off with ...

The problem is that a lot of people don't go into a "REAL" shop. If you go to a general sporting goods store they may just have a brannock, and if pe...

@carvehard I don't have any experience with Kindred, but their ProCarve certainly looks rad. I'd love to try one. The waist width tops out at 284 th...

A while ago I got the Kona specs from Jordan (11.5 boot): Length: 156cm Effective edge: 124cm Nose length: 19cm Radius: 7-10m VSR Nose width...